|
|
DOMED PB & PBRV "ENFORCER"
SERIES
APPLICATION/USE:
Unsurpassed Extra Heavy Duty Unattended On/Off-Street,
Municiple, Campus, Private, Corporate and
Anti-Theft applications.
FEATURES MITI'S UNIQUE PATENTED
"HOOK-LOG" & "VARIABLE TIRE STOPS" ATTACHMENT
SYSTEM
|
|
|
| Domed PB Enforcer
Series "Hook-Loc with Variable Tire Stops" models, heaviest
of the Rhino line, features a built in lock system, unitized
construction, are light weight and install in 30-45 seconds. No
assembly required. The Rhino PB Enforcer Series feature the latest
technology in immobilizer attachment systems. This proven
reinforced design eliminates the possibility of damage, scratching
or marring of the vehicle's wheel rim edge (flange) or hubcap.
It also discourages and deters attempts at forcible removal
by means of double gauge 2" x 2" tubular box steel construction
and heavy gauge steel fish plating welded in place at key
hinge points making it extremely difficult to forcibly remove
or tamper effectively with the immobilizer. A hardened 7/8"
Secur-Bolt provides ample strength to allow for secure tightening
of the immobilizer to the vehicles wheel. The patented Hook-Loc
& Variable Tire Stop Systems are found only on MITI-Rhino
immobilizers. |
Attachment by means of wheel and rim edges (flanges) through attachment
jaws is totally eliminated with the Rhino HG, PBRV &
PB Series immobilizers The inner rotating hook lock arm indexes
quickly within the inner wheel's cavity between the wheel's
brake backing plate or wheel drum. Simultaneously the rigid
outer arms variable tire stop/optional grabber seats at or
near the outer wheel rim edge where the tire meets the wheel,
and indents itself at the tire during tightening insuring
a positive bit on the tire, preventing or deterring forcible
removal or drive away. |
|
An assist spring aids in the installation of the immobilizer by
holding the inner "Hook-Loc" arm against the inner wheel, where
it is indexed between the wheel and brake backing plate.
|
|
MITI-Rhino's stainless steel Secur-Bolt-Key system provides for
secure immobilizer attachment. Holes at the bolt tube are provided
for use of optional padlock & padlock cover for additional
security. Unique design deters unauthorized removal of wheel
or immobilizer. When tightened, the Secur-Bolt applies pressure
against the inner rotating "Hook-Loc" arm, rotating it inward
until it is stopped when the arm's affixed pressure stop
comes into contact with the wheel's brake backing plate,
wheel drum or tie rod end. The inward pressure is then reversed
at the stop, driving the outer affixed and telescoping dome
assembly with protective heading against the outer wheel
or hubcap for a positive vice-like attachment. |
|
The Dome with protective edge heading, clamps snugly against the
outer wheel or hub cap preventing access to the lug nuts.
|
|
The spring loaded Tire Grabber, located on the inner side of immobilizer's
outer arm provides superior resistance to side to side movement
of the immobilizer and forcible removal or drive away. Note:
Can cause tire and or wheel damage if drive away is attempted.
|
|
Bi-directional stand design allows the immobilizer to be
attached to any vehicle wheel - front, rear, left or right
side. Unique to Rhino. |
|
Baked-on environmentally safe safety orange powder coating
provides high visibility and superior rust protection. |
|
Each unit is shipped with one Secur-Key and one package
of immobilization tags. |
| DOMED PB
SERIES HOOK-LOC/GRABBER MODELS |
| Fits most USA
and Foreign compact, subcompact to full size automobiles
and light trucks with standard size tires and wheels. |
PB-10*
10" Domed wheel cover 26.0 Ibs. (11./kg)
PB-12 12" Domed wheel cover 27.0 IBS (12.2kg)
PB-14 14" Domed wheel cover 28.0 IBS (12.7kg)
*Special Order |
|
|
|
DOMED
PBRV SERIES HOOK-LOC/GRABBER MODELS
|
| Fits most USA
and Foreign full size automobiles and light trucks with standard
and oversize tires and wheels. |
PBRV-10*
10" Domed wheel cover 28.0 IBS (13.7kg)
PBRV-12 12" Domed wheel cover 29.0 IBS (13.5kg)
PBRV-14 14" Domed wheel cover 30.0 IBS (13.6kg)
* Special Order
|
| NOTE: 14" domed
wheel covers are ideal for large diameter wheels. 12" are
ideal for general use on all diameters of wheels. 10" domed
wheel covers are ideal for extremely small diameter wheels. Check HERE for model selection. |
|
|
M
SERIES
Fits all U.S.A. & foreign motorcycles. Fits
all sizes of wheels.
M4 Standard
model (without stand), 8.5 IBS (3.86
kilo)
M4S Standard
model (with stand), 8.8 IBS (3.99
kilo)
|
|
|
|
Will fit cycles with solid or spoked rims. |
|
Immobilize First, then Tow & Impound. |
