|
|
DOMED HG
"GRABBER" SERIES
APPLICATION/USE:
Heavy Duty, Unattended, On/Off-Street,
Municiple Campus, Private, Corporate and Anti-Theft
applications.
FEATURES MITI'S UNIQUE PATENTED
"HOOK-LOC" & "GRABBER" ATTACHMENT SYSTEM
|
|
|
| Domed HG
Series "Hook-Loc with Grabber" models feature one piece unitized
construction, are light in weight and install in 15-30 seconds.
No assembly required, and no pieces to lose. The new Rhino
HG Series feature the latest technology in immobilizer attachment
systems. This new reinforced design eliminates the possibility
of damage, scratching or marring of the vehicle's wheel rim
edge (flange) or hubcap. It also deters forcible removal
by means of a spring loaded tire grabber assembly which connects
with the tire and/or wheel preventing ' forcible removal even
if the tire is deflated. Truss plates prevent blending of
the immobilizer also deterring forcible removal. The patented
Hook-Loc & Grabber systems are found only on MITI-Rhino
immobilizers, Mobile Equipment Locks, and Trailer Locks. |
Attachment by means of wheel rim edges (flanges) through attachment
jaws is totally eliminated with the Rhino HG, PBRV &
PB Series immobilizers. The inner rotating hook lock arm
indexes quickly within the inner wheel's cavity between the
wheel's brake backing plate or wheel drum. Simultaneously
the rigid outer arms grabber seats at or near the outer wheel
rim edge where the tire meets the wheel, and indents itself
at the tire during tightening insuring a positive bite on
the tire, preventing or deterring forcible removal or drive away. |
|
An assist spring aids in the installation of the immobilizer by
holding the inner "Hook-Loc" arm against the inner wheel, where
it is indexed between the wheel and brake backing plate.
|
|
MITI-Rhino's stainless steel Secur-Bolt-Key system provides for
secure immobilizer attachment. Holes at the bolt tube are provided
for use of optional padlock & padlock cover for additional
security. Unique design deters unauthorized removal of wheel
or immobilizer. When tightened, the Secur-Bolt applies pressure
against the inner rotating "Hook- Loc" arm, rotating it inward
until it is stopped when the arm's affixed pressure stop
comes into contact with the wheel's brake backing plate,
wheel drum or tie rod end. The inward pressure is then reversed
at the stop, driving the outer affixed and telescoping dome
assembly with protective heading against the outer wheel
or hubcap for a positive vice-like attachment. |
|
The Dome with protective edge heading, clamps snuggly against the
outer wheel or hub cap preventing access to the lug nuts. I
The spring loaded Tire Grabber, located on the inner side
of immobilizer's outer arm provides superior resistance to
side to side movement of the immobilizer and forcible removal
or drive away. Note: Can cause tire and or wheel damage if
drive away is attempted. |
|
Bi-directional stand design allows the immobilizer to be attached
to any vehicle wheel - front, rear, left or right side. Unique
to Rhino. |
|
Baked-on environmentally safe safety orange powder coating provides
high visibility and superior rust protection. |
|
Each unit is shipped with one Secur-Key and one package of immobilization
tags. |
| DOMED HG
SERIES HOOK-LOC/ GRABBER MODELS |
| Fits most USA
and Foreign compact, subcompact to full size automobiles
and light trucks with standard or oversized tires and wheels. |
HG-10 10"
Domed wheel cover 18.5 Ibs. (8.39kg) (Special
Order)
HG-12 12" Domed wheel cover 20.0 Ibs. (9.07kg)
HG-14 14" Domed wheel cover 21.0 Ibs. (9.53kg) |
| NOTE: 14" domed
wheel covers are ideal for large diameter wheels. 12" are
ideal for general use on all diameters of wheels. 10" domed
wheel covers are ideal for extremely small diameter wheels. See
back cover for model selection. |
|
| DOMED ANTI-THEFT MODELS
FOR MOBILE EQUIPMENT AND TRAILERS |
APPLICATION/USE:
Unattended
to Attended Applications
Available to Suit ANY wheeled equipment immobilization
or anti-theft requirement. Many standard models will
readily suit your immediate requirements. If you need assistance
in determining the model required or to place your order,
please call MITI-Rhino or the distributor nearest you. Personal
use and custom engineered models at affordable prices are
available by request. We offer prompt service and delivery. |
|
PERSONAL
USE IMMOBILIZERS NOW AVAILABLE FOR ALL MODELS LISTED.
NOTE: Personal use, anti-theft models feature a modified
Secur-Bolt-Key assembly which maintain the integrity
of enforcement models. |
|
| To order,
indicate model number desired and add suffix "P" to
the part number. Example: H-12 Law Enforcement model.
H-12P personal use model. |
|
|
| Immobilize
to Deter or Stop Vehicle & Equipment Theft.
Mobile Equipment Locks, Trailer Locks
|
