|
|
DOMED H SERIES
APPLICATION/USE:
Proven Standard Duty, Attended/Enforced
Off-Street, Municiple Campus, Private, Corporate and
Anti-Theft applications.
FEATURES MITI'S UNIQUE PATENTED
RHINO "HOOK-LOC" (JAWLESS) ATTACHMENT SYSTEM
|
|
|
| Domed H Series
"Hook-Loc" models feature one piece unitized welded steel
construction, are light in weight and install in 30-45 seconds.
No assembly required. The new Rhino H Series immobilizers feature
the latest technology in immobilizer attachment systems. This
new design fully eliminates the possibility of damage, scratching
or marring of the vehicle's wheel rim edge (flange) or hubcap.
The unique "Hook-Loc" attachment system is found only on Rhino
Immobilizers. |
Attachment
by means of wheel rim edges (flanges) through attachment jaws
is totally eliminated with the Rhino H series immobilizers.
The inner Hook-Loc arm, with pressure stop affixed to the
outer side, indexes quickly within the inner wheel's cavity
between the wheel's backing plate or wheel drum. |
|
An
assist spring aids in the installation of the immobilizer
by holding the inner "Hook-Loc" arm against the inner wheel,
where it is indexed between the wheel and brake backing
plate.
|
|
MITI-Rhino's
stainless steel Secur-Bolt-Key system provides for secure
immobilizer attachment. Holes at the bolt tube are provided
for use of optional padlock & padlock cover for additional
security. Unique design deters unauthorized removal of wheel
or immobilizer. When tightened, the Secur-Bolt applies pressure
against the inner rotating "Hook-Loc" arm, rotating it inward
until it is stopped when the arm's affixed pressure stop comes
into contact with the wheel's brake backing plate, wheel drum
or tie rod end. The inward pressure is then reversed at the
stop, driving the outer affixed and telescoping dome assembly
with protective heading against the outer wheel or hubcap for a
positive vice-like attachment. |
|
The
dome prevents removal of the wheel.
|
|
Tire stop (stabilizer), located on the
inner side of the immobilizer's outer arm, prevents side-to-side
movement of the immobilizer. |
|
Bi-directional
stand design allows the immobilizer to be attached to any vehicle
wheel - front, rear, left or right side. Unique to Rhino. |
|
Baked-on environmentally
safe safety orange powder coating provides high visibility and
superior rust protection. |
|
Each unit is shipped with one Secur-Key
and one package of immobilization tags. |
| DOMED H SERIES
"HOOK-LOC" MODELS |
|
Fits US
and foreign subcompact to full size automobiles and light
trucks with wheel and tire sizes
2-12" wide (5.08 -30.48cm)
x 12- 16.5" diameter (30.48-41.9cm).
Available with 10" (25.40cm),
12" (30.48cm) and 14"
(35.56cm) domed wheel covers. |
|
H-10 10" Domed
wheel cover 16.5 Lbs. (17.48kg)
H-12 12" Domed wheel cover, 17.5 Lbs. (7.94kg)
H-14 14" Domed wheel cover, 18.5 Lbs. (l8.39kg)
|
DOMED HRV SERIES "HOOK-LOC"
"Mighty Boot" MODELS |
| Fits US and foreign subcompact to full sized
automobiles and light trucks, including those with extra
wide wheels and tires. Wheel and tire sizes 2- 17.5"
wide (5.08x44.45cm) x 12 -
24" diameter (30.48-60.96).
Available with 12" and 14" domed wheel covers. |
|
|
HRV-12 12" Domed wheel
cover 20.0 Lbs. (9.07kg)
HRV-14
14" Domed wheel cover 21 .0 Lbs. (9.53kg)
|
|
| NOTE: 14" domed
wheel covers are ideal for large diameter wheels. 12" are
ideal for general use on all diameters of wheels. 10" domed
wheel covers are ideal for extremely small diameter wheels. See
back cover for model selection. |
| Immobilize
to Collect Unpaid Violations. |
