QUALITY IMMOBILIZERS
SINCE 1958
VEHICLE IMMOBILIZER
SPECIFICATIONS
Rhino MODEL M4S
MADE IN THE USA
|
Rhino QUALITY IMMOBILIZERS SINCE 1958 VEHICLE IMMOBILIZER SPECIFICATIONS Rhino MODEL M4S MADE IN THE USA |
|
|
|
||
 |
|
| A. UNITIZED, ONE PIECE CONSTRUCTION: (NO PARTS TO LOSE OR MISPLACE. NO ASSEMBLY REQUIRED!)
Encircles tire and wheel rim INSTANTLY, cannot; be removed by deflation of tire. Fits narrow to
wide cross section tires. ONE PERSON INSTALLATION IN ONLY 30-60 SECONDS; |
|
| B. IMMOBILIZER STAND (LEGS): (PIVOTS FOR ATTACHMENT TO ANY WHEEL) Provides for attachment to either front or rear of any wheel, both front or back wheels. Low 2 3/4" Profile, provides for attachment to most all cycles. Stand removable if required. |
|
| C. JAWS: (RHINO'S UNIQUE ARM JAW TO ARM JAW (DOUBLE ARM JAW) ATTACHMENT DESIGN. WITH PROTECTIVE VINYL END CAPS. ELIMINATES THE POSSIBILITY OF DAMAGE TO THE WHEEL!) Design incorporates both inner and outer arm jaws. The inner jaw is hinged and is permanently affixed at the immobilizers bolt box. The outer arm jaw is rigidly affixed. Both outer and inner immobilizer arms are welded in place at the Tamper proof Secur-Bolt box assembly forming a unitized tamper proof one piece assembly which is light weight, easy to handle, and simple to install. | |
| INNER ARM ASSIST SPRING: A plated assist spring is connected from the inside of the outer arm to the bolt box housing. This spring aids in the Installation of the Immobilizer by pulling the pivoting inner arm inward thus maintaining pressure against the inner wheel. | |
| D. DIMENSIONS: 2 1/2" X 10 1/2" X 17" With Stand Attached: 6 1/2" X 10 1/2" X 17" | |
| INNER ARM LENGTH: M4S Models 15 3/4" (40cm) OUTER ARM LENGTH: M4S Models 15 3/4" (40cm) Effective Working Length from Bolt Box for both arms: 11 3/4" |
|
| E. PROTECTIVE VINYL END CAPS: Durable Vinyl end caps are affixed at arm ends to prevent damage to the wheel or spokes. | |
| F. FITS: All USA & Foreign Motorcycles. | |
| G. STEEL CONSTRUCTION; (UNITIZED. LIGHT WEIGHT. ONE PIECE. DIE FORMED WELDED STEEL CONSTRUCTION) Provides superior durability, dependability and is EASILY REPAIRABLE. No cast parts to fracture or break. | |
| H. SECUR-BOLT LOCKING ASSEMBLY & KEY: Tamper Proof Housing Constructed of 3/16" rectangular tubing with 1 1/4" steel pipe permanently welded to the housing. No cables or lock covers to lose or contend with. | |
| H1.Tamper proof housing (bolt box) assembly protects and keeps the
Secur-Bolt assembly permanently aligned. The affixed tube protects the bolt from damage and
prevents unauthorized persons from loosening it with pliers when it is in the installed
position. Housing bolt tube has two holes provided for attachment of a padlock and/or
lock cover for additional security when deemed necessary. Padlock recommended for all applications.
H2. 3/4" Stainless Steel threaded nut and machined 3/4" threaded and plated steel Secur-Bolt provides gall resistance and superior locking performance. When tightened the bolt applies pressure against the inner side of the inner immobilizer arm and pivots it into a closed position on the vehicles wheel. H3. A custom Secur-Bolt-Key is provided with each Immobilizer. This key (tool) fits the head of the Secur-Bolt which is custom machined. Used to tighten and loosen the Secur-Bolt. H4. Width: Bolt box width 3", Custom widths available upon request to fit special wheels |
|
| I. PADLOCKS: (OPTIONAL FOR ADDITIONAL SECURITY) Available through factory. Please specify Make and model required. MITI recommends Best or American padlocks with hardened shanks. | |
| J. COATING: (HIGH VISIBILITY. NON TOXIC. ENVIRONMENTALLY SAFE. SAFETY ORANGE POWDER COATING) Applied and baked onto each Immobilizer at 425 Degrees. This coating provides superior rust and corrosion protection. Meets or exceeds all EPA, OSHA and DOT specifications. | |
| K. WEIGHT: (COMPACT AND LIGHT WEIGHT) Model M4S 8.8 Lbs. (3.99 kilo) | |
| L. SERVICE: MITI maintains a large inventory for prompt sales, delivery and service. | |
| M. CUSTOM IMMOBILIZERS, PARTS & TOOLS: Custom configurations or modifications are available to meet your requirements, all at reasonable prices. Ratchet extension Secur-Keys are available in place of MITI's Speed Secur-Keys without additional charge. Additional keys available. | |
| N. FITS: All USA and Foreign Manufactured Motorcycles with standard tires and wheel rims. | |
|
|
|
| EVALUATION IMMOBILIZERS AVAILABLE UPON REQUEST TO QUALIFIED AGENCIES | |